How To FIX

Some time ago there was a friend who has a complaint that every time he's run the exe file extension applications dikomputer then always error unworkable. Then it was the error message "Windows can not access the specified device, path, or file. You may not have the Appropriate permissions to access the item ".

Here I will try to answer possibilities that could happen.

To issue an error message as described above, there are several possible causes, including:

1. To run the * .exe file that users are required to have administrator privilegesTo overcome this, each run the * .exe file you right-click on the file and select "Run as administrator"
Or you can also:

    Right-click on the file or folder, then select / click Properties.
    Select by clicking on the Security tab
    Choose a user name you use your computer
    Select or click "Edit". There you can set its permissions by way of ticking the boxes as needed
    Finally click "OK".
2. Another possibility is that the network connection. This usually happens when we access a computer in a network.
3. Next is because the file is missing or corrupt. For which there is no other way unless you copy or re-download the file.
4. The latter is because the files are blocked by Windows or antivirus you use on your computer.How to cope:

    Right-click on a file that is blocked and then click Properties.
    On the General tab, click the "Unblock" (performed only if the file was blocked by Windows / antivirus)
Hope it is useful. For more information about the full guide how to fix this error, you can try to visit the Microsoft Support page at: http://support.microsoft.com/kb/2669244 

How to resolve Windows can not be installed to the disks The selected disk is of the GPT partition style. If you experience difficulties when installing Windows 7 or Windows 8 with Windows problems can not be installed to this disk. The selected disk is of the GPT partition style. This short article will help you resolve the issue. Directly to the subject matter for your Windows install.

Note: If your computer has been in intal operating system, I recommend to do a backup of all your data. Because of the following operations will erase all hard disk partitions.
Here are the steps:

    Insert the CD or USB boot your Windows installation.
    Follow the steps in the CD instalasai.
    Having reached the interface to install, (there is the main picture of this article).
    Press Shift + F10, it will open a Command Prompt window.
    Typing the command "Diskpart" and then press Enter to start this operation.
    Typing the command "list disk" and then enter. This command to see the current disk partition. Usually the partition for Windows on the disk 0.
    Typing the command again "select disk 0" and then enter. This command to select the partition you will install Windows.
    Typing the command "clean" and press enter to clean the disk partition.
    Typing the command "convert to mbr" and press enter. This command mode to convert the hard disk from GPT to MBR mode.
    (Optional) Now create a new partition by typing the command "create partition primary size = xxx" (you can replace the letters xxx with the number you want, the numbers in the Mega Byte size or MB). Or you can pass if you want to create partitions in the visual appearance of Windows installed later.
    (Optional) Type the command again "format fs = ntfs quickly" (command to format in fast mode). You can ignore this command.
    Typing the command "exit" to end the operation in diskpart.
    Again typing the command "exit" to exit the Command Promt.
    The last step, restart your computer to start the installation of Windows.
Another way to install without removing the data D: \ submissions from the Microsoft community who replied my writing, but I myself have not tried.

Windows 7 operating system is one of the operating systems that terstabil today. But even so, on paper the Windows 7 operating system also has an error. Errors that often arises is the Windows error recovery, where the error is a message that conveys that a system error occurs. In the message, you are given two options whether you want to run a program to repair or want to stay logged into Windows normally. Is when we choose to enter Windows normally after restarting the computer will display a message Windows error recovery again. This problem is a scourge for the Windows operating system Windows 7. How do I fix the error recovery?
To fix Windows error recovery is not too difficult. We only need a few steps, which steps can be done by ordinary computer users. By eliminating Windows error recovery, then every time the computer starts will not appear window Windows error recovery that requires you to select one of the options provided.

Windows error recovery usually occurs because the crash occurred on the operating system Windows 7. The problem is that class usually because a sudden power outage, or Windows system crashes because of hardware problems.
How to fix Windows error recovery can be done using the following steps:

    Please open the Command Prompt software. Steps is to click Start, then select Run, then type "cmd" without the quotes.
    In the Command Prompt window that pops up, "bcdedit / set {current} bootstatuspolicy ignoreallfailures" without quotes.
    After that, you can press Enter to execute the command.
    Finally please restart the computer.
After you do the 4 steps above, then the problem will disappear Windows error recovery. When the computer is doing startup, window Windows Error Recovery will not reappear.
Thus tutorial how to fix Windows error recovery can I post on this occasion. Hopefully this short article above can assist you in troubleshooting Windows error recovery that appears on your computer. 

Me in this article will explain several ways / tips to overcome Blue Screen in Windows 8 and Windows 7

Blue Screen is also commonly called the Black Screen occurs because a critical error on a computer system causes the program / apilikasi running should be stopped and the computer suddenly shutdown or restart. Blue Screen also typically display a message like this "Windows Has Been Shutdown to prevevent damage to your computer"

Error is common because there are problems with the hardware or computer hardware drivers. But Not all Blue Screen occurred because of computer hardware problems, can also occur due to damage to a computer system or computer software.

Below I will describe some of the ways to overcome the problem of Blue Screen in Windows 8 and Windows 7.

Error in Registry

System registry is responsible for the passage of system settings. If the problem is in the sytem registry, can be overcome by using a registry cleaner like CCleaner

Error in Software / application

A bug in the software may cause a Blue Screen. If the Blue Screen appears after installing the software, restart the computer and then uninstall the program

Control panel - Add / uninstall the program - select the program that you want to uninstall

Error in Hardware

Sometimes - sometimes new hardware installed on a computer causes the computer to blue screen. If that happens, remove the hardware and then look at the hardware manufacturer's official website is available updates or bug fixes for the hardware

Some other tips to resolve Blue Screen in Windows 7 and Windows 8:

1. Try to install the original software, because the majority of pirated software contained therein malware / spyware

2. Close all programs running on the computer when you want to turn off. Do not turn off the computer by pressing the power button, as this may damage the computer system

3. Disable the start-up of unwanted programs, so as not to overburden the system

To deactivate the start-up:

Go to Run (Windows key + R), then type "msconfig"
After msconfig open, select Start up
Select all unwanted programs, and then click Disable (note: see the name of the program before it is disabled, do not disable the program windows or microsoft)

Such a brief article on How Troubleshooting Blue Screen in Windows 8 and Windows 7
If the above tips do not work, tell the Admin this blog with your comment

As we know that every user of Windows 7, 8, 8.1 and other editions will be offered a free upgrade to Windows 10. Well ... yesterday was July 29 when officially launching Windows 10 and this means that your machine can be migrated to the latest version of Windows. But my friend's laptop cases do not surf the process, failing even though Windows 7 SP1 (64-bit) is the original and have installed the latest updates.
So Sunday I tried to find a solution and I noted all here to help you experiencing the same problem.

And finally I succeeded. :)
The first is a method to force Windows Update to repeat and recognize that the upgrade can be executed, but you are required to clean up before the update folder in the location C: \ Windows \ SoftwareDistribution \ Download. Just delete all folders in it, this will make the contents of the Windows Update become vacant as a new install.
Then run the command prompt with administrator rights (right-click and select Run as administrator), and type the command Wuauclt.Exe / updatenow.

Then the Windows update process will run (set up with high speed internet or staying asleep alone), and should be in the command prompt window will display a notification before upgrading to Windows 10.

Okay ..!! I think this article that has the longest title hehe ...
Never experienced this in your windows?
There may be some who complained that his laptop or PC can not change the wallpaper, or display a black desktop and in the bottom right corner of your desktop screen is written as follows:
Windows 7
Build 7600
This copy of Windows is not genuine

After downloading Microsoft Office 2010 Beta 2 and activate Microsoft Office 2010 Beta 2 offline by doing a registry hack, finally we can use the Microsoft Office 2010 Beta 2 to whenever (NO 30-usage days). But you realize when you first run the Microsoft Office 2010 Beta 2 (eg Ms. Word), look at the titlebar. You will receive a mark below.
Admin itself thinks these signs appear because we do not activate the Microsoft Office 2010 Beta 2 online. The sign is not actually affect the program Microsoft Office 2010 Beta 2, but indeed an eyesore us. Moreover, if we are to show off to our friends, that we have been using the latest version of Microsoft Office 2010 (though still Beta 2).
Sign "Microsoft Word non-commercial use (Unlicensed Product)" we can actually lose. After Admin "ubek-ubek" the contents of the Windows registry, Admin finally get his way. Admin As far there has been no posts about this, so immediately wrote "quasi atuh" doing


1. Turn off beforehand all the programs Microsoft Office 2010 Beta 2.
2. Go to the Registry Editor (Start Menu à Run à type "RegEdit").
3. Immediately to the following registry location:
"HKEY_CURRENT_USER \ Software \ Microsoft \ Office \ 14.0"
4. There are whole settings of all Microsoft Office 2010 Beta 2. Now we take the example of Microsoft Office Word 2010 [Beta]. Please click the arrow on the path '14 .0 'and select subpath' Word '.
(HKEY_CURRENT_USER \ Software \ Microsoft \ Office \ 14.0 \ Word)
5. In the right panel there is a string value 'WordName', double-click and change the string or its data value of "Microsoft Word non-commercial use (Unlicensed Product)" to "Microsoft Word" only.
6. Next, right click on the subpath 'Word', and select 'Permissions ...'.
7. In the window 'Permission for Word' select 'Advanced', then select 'Edit ...'. Finally, the window 'Permission Entry for Word' tick all options 'Deny'. Then select 'OK' à 'OK' again.
8. If there is the following message select 'Yes' and then select 'OK'.
9. Exit Registry Editor and restart your PC or notebook (this condition).
10. Once logged in, please rerun the Microsoft Office Word 2010 [Beta].
11. When all the above steps you did right, titlebar Microsoft Office Word 2010 [Beta] you will return to normal with no sign of "pirated" again.
Explanation:
· 'WordName' is a string that will be displayed on the titlebar Microsoft Office Word. If the string is modified, the titlebar Microsoft Office Word will change.
· Settings 'Permissions ...' is done so that Microsoft Office can not bring back the "pirated" (to activate the option Deny).
· If the 'Deny' is not selected, the Office will continue to display signs of "pirated" although amended.
This way you can also do in other Microsoft Office applications, in addition to Word.

BOTH WAYS.

or if you already have office 2010 toolkit may be used in this way:
open office 2010 toolkit -> then click License files -> Repair.
if the process is finished and then click Main -> EZ-Activator, is completed.

The second way is already successfully i do in computer (office) Myfriend.